FROST RESISTANCE  otpornost od mrznewe                        

Since PP-r elasticity allows the pipe to increase its section according to the volume of the frozen fluid inside it.

 STRAY CURENTS RESISTANCE otpornost od  t.n."lute~ki strui"

 Since PP-r is a very poor electric conductor, no puncture due to any stray current will occur.

 NO CORROSION otpornost od triewe i korozija

Since PP-R pipes withstand all types of water hardness and chemical substances with 1 to 14 PH values i.e. they withstand acid and alkaline substances within a wide concentration and temperature spectrum.

 LESS CONDENSATION AND LOSS OF HEAT  

  pomala kondenzacija  i zaguba na toplina

Since PP-R, like all plastic materials, is a very poor heat conductor hence a very good insulating material.

 FITNESS FOR USE IN SISMEIC AREAS fitinzi za upotreba vo seizmi~ki podra~ja

Recognized by commissions of international engineers, as plastic materials are not rigid bodies inside the building structure.

LESS PRESSURE LOSSES pomali zagubi na pritisok

Thanks to the smooth inside of pipes, which avoid incrustations.

PLANT LESS NOISY  bez{umnost

Like all plastic materials, PP-R soundproofing and elasticity absorbs well any water hammers which cause annoying vibrations and noises in the buildings.

 LONG LIFE dolg `ivoten vek 

Up to 50 years, depending on operating temperature and pressure.

 ABRASION RESISTANCE otpornost od abrazija 

 A PP-R pipe allows high water velocity without any corrosion problems.

 ENERGY SAVING za{teda na energija 

PP-R pipes reach their operating temperature much faster then metal pipes. Less energy is wasted heating the pipe and less insulation is needed.

 HYGIENIC AND NON-TOXIC ne toksi~na i higenska

 PP-R system is non-toxic in accordance with current international standards.

 METAL THREADS metalen navoj

All metal threads in the fittings are manufactured from Mc-58, galvanic protected (Ni) and guarantee non-leakage connection with all metal parts in the system.

 WELDING mo`nost za neograni~eno spojuvawe

That is one of the basic characteristics in this system .All parts in the systems can be welded with poly- fusion or electro fusion sockets.

 VARIOUS raznvidnst vo transport, rakuvawe i vgraduvawe

 Low specific weight allows easy handling and transport on the pipes.The system can be put in or out on the wall.

  POLYFUSION lesnotija vo spojuvaweto

 The welding is with a welder, heating up the two parts at the same time, which should be connected.When the welding temperature is reached the parts are coupled together with light pressure, were we get a perfect sealed join.

PREPARATION podgotovka

 The outside surface of the pipe and the fittings must be clean and smooth. The end of the pipe has to be cut under right angle. Before welding the welder should be checked and the welding temperature reached.

PERFORMING izvedba 

clearing it from any residual burr.

to weld together.

off still at the same time.

time without any rotation and keep

pressure for a few seconds.

 WELDING WITH AN ELECTRIC SOCKET spojuvawe so elektricen muf

TECHICAL CHARACTERISTICS tehni~ki svojstva